Las mejores 24 Espumas De Poliuretanos Pistolas Orbafoam.

Opinión de un comprador: Excelente calidad y simple app

VER MÁS OPINIONES

Opinión de un comprador: Bastante fácil de usar

VER MÁS OPINIONES

Opinión de un comprador: Bastante buena

VER MÁS OPINIONES

Opinión de un comprador: Tenía un agujero enorme en el hogar para la manguera que carga el gasóil de mi calefaccion. Tenía un tubo de 20 cm de grosor y mucho vacío para completar, con esto tapé el hueco, recorté el sobrante, acuaplash, lima, obra y como nuevo. Me sirvió, también, para cubrir orificios en el techo. Se aplica, se está dejando secar, se corta el churro y como antes.
Ofrece muchas soluciones si se meta bien.

VER MÁS OPINIONES

Opinión de un comprador: Solo lo he aplicado una vez para lavar la pistola. Va superbien. Puedes usar atornillado a la pistola para la limpieza interior y como un spray natural con una boquilla que trae para lavar exterior. Tan solo limpia espuma caliente. Aconsejable.

VER MÁS OPINIONES

Opinión de un comprador: Buscaba espuma para asegurar mis ventanas nueva, es mejor de lo que me esperaba, se adhiere bien y no aumenta muchísimo lo que me a satisfecho bastante.

VER MÁS OPINIONES

Opinión de un comprador: La mejor pistola de espuma que he tenido la uso todos los días 5/6 botes día tras día hace 5 años la compre por vez primera. Genial

VER MÁS OPINIONES

Opinión de un comprador: I've always hated using expanding foam, due mostly to only ever using the disposable single use tins. I found the procedure to be hard work, given the lack of observación and wasteful since it's pretty impossible to clean the disposable tins out in order to use them again in the future.
I bought this gun to fill a few holes around drain pipes at home and so far, I'm very impressed.
The applicator gun arrived quickly and well packaged in a Preciva branded box. Inside the box, there was the gun, an instruction book and four plastic nozzles with a tiny hole at the end.
On first impressions, I wasn't sure about the nozzles given the size of the hole.
The gun seems very well made. It is made of a combination of plastic and mineral parts. It feels very sturdy and rigid, with all of the interfacing parts feeling very secure.
The handle is plastic with a silicone over mould. The plastic of the handle is rigid and doesn't seem to flex. It is hollow - the bottom end is open, but that doesn't compromise the rigidity of the tool. If anything, it makes it pleasantly light and well-balanced.
The socket for the foam can is also very sturdy and I found it hard to over tighten the can here. With hand pressure, the tin was well seated.
On to using the gun (after shaking the foam can well), there is a knurled screw at the back of the gun which allows you to limit the action of the trigger. It goes from fully closed, where the trigger is locked closed right through to a full range on the trigger. Fully open may be useful if you are filling a chasm, but for lógico jobs, I found I only needed to open the screw a small amount to get good control.
I started of without the plastic nozzles and, although it worked well, I quickly gave the nozzles a try, to get right in between the drain pip and brick. Although I was concerned about the small hole, It all worked very well - the plastic nozzle stayed attached and it further improved mando of application.
So, all holes filled, I moved on to cleaning the gun. Again, this was something I was unsure about before.
Removing the can of foam did result in some overflow at the connection point. Nothing too great and it was easy to manage. The foam cleaner I bought had a spray nozzle, which I used to clear the foam from the attachment point first. The foam just melts away with the foam cleaner, so that was quickly clean.
After that, the foam cleaner can fits to the same attachment point as the foam can used and you just spray out the excess foam and a bit of the cleaner until the last remnants of foam have gone. You can see in my photo that the foam that initially came out of the gun when I was cleaning it was quickly dispersed by the cleaner and all parts of the gun (including the plastic nozzle) were thoroughly cleaned.
All in all, this was a very pleasing experience. I've bought a couple of tools from the Preciva brand in the past and this tool did not disappoint. It is well manufactured and there trabajen't any annoying niggles (like bad moulding or loose parts). I like that there is an instruction book to guide through the first steps. It clearly is a manual translated from Chinese, but the outcome is understandable and clear enough to follow. You probably won't read it beyond first use anyway - if at all!
For the money, this tool is excellent value. While the handles may be mineral on the more expensive models, I found that to be the only significant difference here and I actually found it more comfortable using a plastic/silicone handle outside on a cold winters morning anyway!
I would definitely recommend this and wouldn't bother with the disposable cans. On second use, you'll have made up the cost of the gun, four uses will cover the cost of the large foam cans and cleaner as well. The fact the big can will now outlast those four uses makes this a bit of a no-brainer! I also regalo't think I'd go to the distinga of buying an expensive version of this gun. At the end of the day it is an applicator gun and I think Preciva have priced this at the right level for what it is.

VER MÁS OPINIONES

Opinión de un comprador: Cumple su misión, la verdad que no es que sea una herramienta de gran ingeniería , pero se ve bien construida y no se obstruye con facilidad, si usas un limpiador al concluir los trabajos , pienso que puede ofrecer un rendimiento excelente.

VER MÁS OPINIONES

Opinión de un comprador: Estamos frente a un envase de espuma de poliuretano convencional, para completar huecos, yo lo función para completar piezas de la linotipia 3d por dentro y va genial, tarda en secar muchísimas horas pero le proporciona una severidad a la pieza espectacular. Mejor remedio que completar la pieza de PLA.

VER MÁS OPINIONES

Opinión de un comprador: Perfectamente por poquito dinero , no sé como va a ser luego de bastante manejo, pero se ve de buena calidad y realmente todas y cada una mueren por lo misma, por atascos, tanto las baratas como las caras, por eso es chorrada gastar mucho dinero.

VER MÁS OPINIONES

Opinión de un comprador: Producto excelente y bulto rapido, pero los botes llegan abollados y en malas condiciones.

VER MÁS OPINIONES